![]() ![]() Save and exit nano with Ctrl + O then Ctrl + X. This will allow your Pi to assign individual IP addresses to devices that connect to it. Save and exit nano with Ctrl + O then Ctrl + X, and edit the nf file: sudo nano /etc/nfĭelete the contents, and paste in: interface=wlan0ĭhcp-range=192.168.4.2,192.168.4.20,255.255.255.0,24h Use nano to edit the nf configuration file: sudo nano /etc/nfĪt the end of the file, paste the following: interface wlan0 Your Pi-based network needs to be given its own IP address. You will also need dnsmasq, netfilter-persistent and its iptables-persistent plugin: sudo apt install dnsmasq & sudo DEBIAN_FRONTEND=noninteractive apt install -y netfilter-persistent iptables-persistent ![]() SSH into your Raspberry Pi again, and install hostapd: sudo apt install hostapdĮnable the service so it starts as soon as your Pi boots: sudo systemctl unmask hostapd You need to set it up to act as its own access point to which devices can connect without internet access. Until now, you've been accessing your Raspberry Pi over your home network. In our case, this would be vanpi.local:8096. The ARMv8-A architecture, which encompasses the 64-bit AArch64 architecture and associated A64 instruction set, was first introduced into the Raspberry Pi line with Raspberry Pi 3 in 2016. Now it’s time to open it up to a wider audience. When it completes, open a browser and enter the hostname of your Pi into the URL bar, then press Enter. Over the past year, we’ve been trialling a beta of Raspberry Pi OS in glorious 64-bit. Make sure that they're separated into different folders on your local PC and that the folders have easy-to-recall names such as movies, shows, and music.Ĭlose the SSH connection, then transfer these folders from your local PC to your Pi with: scp -r movies/ shows/ music/ pi on the size of your collection, this transfer could take several hours. You should already have your MP3 and MP4 files ready to transfer. When you're returned to the command prompt, start and enable Jellyfin as a service: sudo systemctl start jellyfin Update once more, and you can install Jellyfin from the new repository: sudo apt update The next command will echo your processor type and OS to a text file that will be used to install the correct Jellyfin version: echo "deb $( awk -F'=' '/^ID=/' /etc/os-release ) main" | sudo tee /etc/apt//jellyfin.list With your software up to date, you can now add the Jellyfin repository key: sudo apt install curl gnupgĬurl -fsSL https: ///ubuntu/jellyfin_ | sudo gpg -dearmor -o /etc/apt//jellyfin.gpg Jellyfin is free and open-source media streaming software that will run well on your Raspberry Pi. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |